Knowledgebase
PDE Settings in IPS
Ideal POS System 5.5 is compatible with the Denso BHT-6000, Denso BHT-8000, Benso BHT-300 and Nippondenso BHT-6000 PDEs, are used remotely to perform various Stock Related Transactions, and include the ability to scan UPCs/EANs. They can then be uploaded to Ideal POS System.
The 4 PDEs are installed similarly with one another; however, the only difference is the terminology in each device. In this chapter, we will explain the installation for Denso BHT-8000 and Denso BHT-300.
To setup a PDE in Ideal POS System;
1. Go to Setup > PDE.
2. Click on Add button to add a new PDE.
3. Enter a suitable description for your PDE.
4. Select the PDE model. Note that the BHT-8000 is compatible with the BHT-6000.
5. Select the COM Port that will connect your PDE to.
6. Select the Baud Rate that has been setup in your PDE. Your PDE may not work with Ideal POS System if this setting is incorrect.
7. Click on Save button.
The BHT-6000 and BHT-8000 requires the TSR-TU3A Transfer Utility for PDE communications. This program is not supplied with Ideal POS System and needs to be purchased from your Nippondenso supplier.
The 4 PDEs are installed similarly with one another; however, the only difference is the terminology in each device. In this chapter, we will explain the installation for Denso BHT-8000 and Denso BHT-300.
To setup a PDE in Ideal POS System;
1. Go to Setup > PDE.
2. Click on Add button to add a new PDE.
3. Enter a suitable description for your PDE.
4. Select the PDE model. Note that the BHT-8000 is compatible with the BHT-6000.
5. Select the COM Port that will connect your PDE to.
6. Select the Baud Rate that has been setup in your PDE. Your PDE may not work with Ideal POS System if this setting is incorrect.
7. Click on Save button.
The BHT-6000 and BHT-8000 requires the TSR-TU3A Transfer Utility for PDE communications. This program is not supplied with Ideal POS System and needs to be purchased from your Nippondenso supplier.
Point of Sale Systems
