You are here: EFTPOS > SmartConnect > Setup for SmartConnect

Setup for SmartConnect

Licencing

You will need to ensure that you have the SmartConnect in the Licence Gateway.

 

Go to Setup > Licence Gateway.

 

 

POS Terminals

You will need to configure Idealpos to connect to SmartConnect.

 

Go to Setup > POS Terminals > EFTPOS Settings > EFTPOS Settings > EFTPOS Type: SmartConnect.

 

 

When you select SmartConnect a new Pairing field will display at the bottom right corner of the screen. You need to get the pairing code from the Pinpad to pair the devices.

 

 

On the Pinpad press Function > 3. Config

 

 

Enter terminal Password.

 

 

Select 1. POS Integrations

 

 

Select 1. Authorise POS

 

 

The device will display a Pairing Code.

 

 

In Idealpos, enter the code into the Pairing Code field and press Pair. You have approx. 30 seconds to do this before the Pinpad will reset and you will need to restart the procedure to get a new pairing code.

 

 

Once paired, the Pinpad will display a Pairing Complete and Idealpos will display a confirmation message.

 

 

 

The Pinpad will display the details from Idealpos’ Licencing Gateway, including the POS terminal it’s connected to.

 

 

 

If for some reason Idealpos can’t pair with the Pinpad, a message will display on-screen. Go through the steps again to ensure everything was entered correctly. If there is still any issues, you will need to contact SmartPay.